Safety Flash 20/26
Click here to download the IMCA Safety Flash 20/26. Here are a few of the incidents covered;
MSF: Someone’s finger trapped in the door
After finishing work, a crew member was in the changing room, located next to the Engine Room access door – a heavy fire door. The crew member was standing in the gap between the lockers and the door which opened into the room. The crew member, without looking, happened to place their right hand with the middle finger overlapping the door frame and the door (see image, a re-enactment). At almost the same time, another crew member opened the door from the engine room door and let it go. The door closed fast, catching the first crew members’ middle finger, causing a severe injury.
MSF: Serious hand injury (LTI) – failure to Isolate
Engineers were inspecting the emergency generator after a noise had been reported. Believing the sound originated near the turbocharger, they removed the air filter and housing to improve visibility. With the guard removed, the engine was started to observe the suspected area. During the inspection, the Chief Engineer attempted to adjust the air filter housing clamp, and his hand entered the exposed hazard zone, contacting the rotating turbocharger fan and resulting in a partial finger amputation above the last knuckle.
Hand injuries – keep your hands clear, every task, every time
ne of our Members notes a spate of recent hand injuries occurring during activities such as lifting and rigging, manual handling, valve operation, drilling, grinding, machinery maintenance, handling chains, disassembly of equipment, and routine workshop activities.
In several cases:
- Loads, chains, pins, tools or equipment shifted unexpectedly.
- Personnel instinctively attempted to stop, guide or control moving objects by hand.
- Rotating or powered tools contacted the hand during use or handling.
- Pinch points were not fully recognized during otherwise routine tasks.
Hand injuries can result in cuts, lacerations and puncture wounds, crushed fingertips and fractures and nerve, tendon and nail damage. Watch your hands – you’ve only got one set!
LTI: serious finger injuries during crane operations
During the transfer of materials onboard a large offshore vessel, the boom of a 12 tonne crane moved towards the pipelay tower, and trapped the spotter’s left hand against a handrail.
Finger injury caused during maintenance of rotating machinery
A crew member was repairing a broken grease nipple on an Air Handling Unit. Although the electrical supply was isolated, the V-belt continued to rotate due to residual mechanical energy. While manually attempting to restrain the belt, two fingers were drawn into the pinch point between the V-belt and pulley, causing a laceration and hairline fracture to the fingertip. The case was considered a Restricted Work Case (RWC) based on the medical practitioner’s report, with a High Potential (HIPO) — a more severe outcome could have resulted in loss of a finger or fingers.

